Procedure to run the simulator

1. Enter the value of load you want to transfer in LOAD tab. \
2. Enter the value of angle of inclination on which object is kept in ANGLE tab. \
3. Enter speed of extension of cylinder at witch you want to transfer the object in SPEED tab. \
4. Using formula calculate the cylinder bore diameter and enter the answer in the DAIMETER tab. \
5. Submit the answer. \
6. If your calculation is wrong, you will be asked to repeat the same. Refere FORMULA tab and verify your calculations. \
7. Select the direction control valve. \
8. Complete connection with working port, supply port and exhaust port. \
9. Run the system.